top of page
BMW N57D30 upgrade turbocharger

BMW N57D30 upgrade turbocharger

PriceFrom €990.00
* Price is shown without VAT and shipping costs.
 
Bolt-on upgrade turbocharger solution for BMW N57D30 engine power gain, designed to work with stock exhaust manifold and other engine units. Four versions available from Stage 2 to Stage 5. Specifications and compatibility list written below.

  • Specifications

    ATTENTION! Import taxes may apply when buying from outside EU. Tax rates are calculated and collected by buyers local customs. VAT (Value Added Tax - 21%) is applied only for buyers from EU. For full information about import taxes in your country please visit your local customs website.

     

    ATTENTION: Some elements of this turbocharger may vary by market. If your vehicle is intended for USA domestic market please write your car VIN number in the notes when ordering, Otherwise we cannot be sure you will receive correct assembly.

     

    Stage 2 (HTD2872):

    • Upgraded bearing system;
    • CNC machined compressor housing;
    • CNC machined turbine housing;
    • OEM variable geometry nozzle;
    • reinforced bigger machined from the solid compressor wheel - 50/72mm;
    • bigger turbine wheel - 51/49mm;
    • Flow bench adjusted;
    • Balanced on VSR;

    Power range: up to 400HP

     

    Stage 3 (HTD3073BB):

    • dual ceramic ball bearing;
    • CNC machined compressor housing;
    • CNC machined turbine housing;
    • Custom variable geometry nozzle;
    • reinforced bigger machined from the solid compressor wheel - 54/73mm;
    • bigger turbine wheel - 58/54mm;
    • Flow bench adjusted;
    • Balanced on VSR;

    Power range: 420+HP

     

    Stage 4 (HTD3279BB):

    • Big dual ceramic ball bearing;
    • Enlarged shaft (6mm diameter ) and turbine wheel;
    • CNC machined compressor housing;
    • CNC machined turbine housing;
    • Custom variable geometry nozzle;
    • Reinforced bigger machined from the solid compressor wheel - 56/79mm;
    • High flow design turbine wheel - 58/56mm;
    • Flow bench adjusted;
    • Balanced on VSR;

    Power range: 470+HP 

     

    Stage 5 (HTD3379BB):

    • Big dual ceramic ball bearing;
    • Enlarged shaft and wheel diameter 7mm;
    • CNC machined compressor housing;
    • CNC machined turbine housing;
    • NEW design custom variable geometry nozzle with 14 nozzle blades;
    • reinforced bigger machined from the solid compressor wheel - 56/79mm;
    • High flow design turbine wheel - 62.8/56mm;
    • Flow bench adjusted;
    • Balanced on VSR;

    Power range: 500+HP

     

    Please note that with upgrade turbocharger installed you will need engine tuning. 

    Stage 3-5 turbochargers should be used only for professional use. Upgraded intake system as well as performance downpipe and custom software is required in order to achieve the best results.

     

    When installing a new turbocharger we recommend to read our Installation guide.

  • Compatibility list

     

    Model Year Engine code Power (KW / HP) Garrett nr. OEM nr.
    BMW 325 d (E90/E91/E92/E93) from 2010 N57D30 150 / 204 777853-x 657799759
    BMW 330 d (E90/E91/E92/E93) from 2008 N57D30 180 / 245 777853-x 657799759
    BMW 330 xd (E90/E91/E92) from 2008 N57D30 180 / 245 777853-x 657799759
    BMW 525 d (F10) from 2010 N57D30 150 / 204 777853-x 657799759
    BMW 530 d GT (F07) from 2009 N57D30 180 / 245 777853-x 657799759
    BMW 530 d (F10) from 2010 N57D30 180 / 245 777853-x 657799759
    BMW 730 d (F01) from 2008 N57D30 180 / 245 777853-x 657799759
    BMW 730 ld (F02) from 2009 N57D30 180 / 245 777853-x 657799759
bottom of page